ProCon 4G

GSM/2G/3G/4G communicator, it can be used as a standalone alarm center

icon_dualmemoryEventlist anti jammer device smartphone application bluetooth programming programming by voicemenu software fro GSM modules three years of warranty


5 contact driven input


1 NO/ NC relay output which can be controlled either by SMS from unlimited phone numbers or by voice call from 1000 phone numbers

icon_yes8 notified phone number can be set

icon_yesSMS, voice message, Contact ID sending

icon_yesExpansion possiblity

icon_yesGPRS transmission to the monitoring station, by Enigma and SIA IP protocol

icon_yes Programming by SMS, PC and android application via Bluetooth and Internet

3G communicator
3G module in box
  • It can send notification to 8 phone numbers in SMS and/or voice message. The notification sending can be triggered by a signal arriving to any of the 5 inputs, by power failure, by sabotage or by arming/disarming of the GSM module.
  • Unique SMS message can be set about the alarm event. The dial time, number of dials as well as the circular configurable seperately.
  • Output control can be made from unlimited phone numbers with a free call. When controlling with caller identification numbers can be stored in the memory of the module (1,000 in this case), or on the SIM card inserted. The output can be monostable (up to 65000 sec.) or bistable.
  • As a standalone alarm center the inputs work like zones, a siren can be activated by the output. In addition, the module can be armed/disarmed by free call.
  • The tamper input on the module can be used as a sabotage indicator with setting possibilities alike to inputs. Shortening it before powering on then cut short in 3 seconds functions as a ’’reset’’ that can revert the module back to its original factory state.
  • The ProBattery allows to monitor the power outage, and it provides enough power to the module for 24 hours.
  • The ProCon GSM can be programmed by SMS, android (bluetooth, GPRS) or by PC (USB, Bluetooth) with the ProRead software. The device monitor and log the GSM signal stregth every hour, which can be visualized on a diagram
  • . The module can store up to 16,000 events in which appear states of the inputs and outputs, power supply resets, GSM network and module state related information, incoming and outgoing calls and SMSs. SIM functions: forwarding incoming SMSs to a predefined phone number, warning message ragarding the expiration of the SIM card validatity. Expansion possbility: Relay output panel (EXPrelay), or alarm center panel (EXPAlarm)etc..
Inputs (+ expander): 5 (+1)
Relayed Outputs (+ expander): 1 (+3)
Relayed output load: max. 30V@500mA
OC outputs (+ expander): (+1)
OC output load: max. 30V@400mA
User phone numbers for sending notification: 8
User phone numbers for output control: Unlimited / 1000 phone number
Independent signal sending to monitoring center:
User phone numbers for forwarding incoming SMSs:
Transmission channel: GSM/GPRS/EDGE/WCDMA/HSPA/4G
Caller identification:
Alarm center function (arm/disarm, entry/exit delay)
Selectable 24h zones:
Adjustable input sensitivity:
Configurable inputs (NO/NC):
Independent SMS sending to user phone numbers with customized text:
Monitoring station phone numbers: 2
Periodic test report sending:
Sending recorded voice message to user phone numbers:
Sending alarm to user phone number with siren sound:
Inbuilt internal clock:
Event list / number of stored events: 16 000
GSM siognal strength monitoring and logging hourly
Translation Contact ID codes into SMS along with sending it to user phone numbers (Distinguishing 250 events and 250 zones)
Configurable own Contact ID codes:
Telephone line simulation:
PSTN phone line monitoring:
Output activation with free GSM call:
Security SMS password:
Programming software(PC, Android):
Programming method: USB / SMS / Bluetooth
Battery connection options:
Power drain (standby/transmitting over GSM): 30mA/700mA
Simulated line/transmitting over GSM:
Power voltage: 9-20 VDC
  • Power voltage: 9-20 VDC
  • Standby current: 30 mA
  • Maximalcurrent: 700 mA
  • Relayed output: max. 30V@500mA
  • GSM module type: SIM5300EA
  • GSM frequencies: WCDMA/HSPA 900/2100/2400 Mhz GSM/GPRS/EDGE 900/1800 Mhz
  • SIM card usage: unlocked GSM module
  • GSM antenna type: SMA connector (the package contains)
  • Size: 78 x 51 x 20 mm, Package: 132 x 128 x 32 mm
  • Operating temperature: -20°C – +50°C
  • The ProCon 3G does not contain DTMF decoder
  • GSM/GPRS transmission for alarm centers
  • It can be used as a standalone alarm center
  • Control: Gate, barrier and garage door opening
  • Home automation (air conditioner, heating system, sauna, lighting)
  • Monitoring supply voltage (230V) along with sending notification about alarms
  • Monitoring and restarting servers


SMS programming

programming by voicemenu

3G mdoule programming software

smartphone application

The package includes

icon_yesinstaller manual
icon_yeshole template
icon_yeswarranty ticket